|
|
- HOLDING BAR
- A: titanum rod Ø2.5mm lenght 200mm bended
at each end, and locked in its middle with a bolt Ø3x10mm
- B: round pin 25mm long in aluminum Ø8
- C: swivel, aluminum shape,U8x8x0.5mm fixed on
pin B with an axle Ø2.5mm
- D: central part of the stabilizing bow, in aluminum
pipe Ø6x1mm
- E: pipe Ø6x1mm for fixining the pendulum
stem with a stop-bolt Ø2mm.
-
- PENDULUM
- F: stem of pendulum Ø7x0.5mm lenght 300mm
nested on the pipe E and locked with a stop-bolt Ø2mm
- It is possible to install a M. Haugrund damping device
with a longer rod A. (minimum 300mm)
Assembly of parts D and E is done with aluminum rivets. |