-
- MAKING
-
Get stainless steel rod Ø
4 mm 400 mm long.
Form it to the drawing shown. Start
by the tips.
Fix the rod into a bench vice.
To help the bending, give shocks
to the rod with a hammer near the bending place.
-
-
- USE
-
|
|
Hold the grap handle such that
the gap part is horizontal.
Insert the line into the gap. Turn
the handle and wind the line around it.
After 4 or 5 loops, the handle
is let free and take the position as shown on the picture.
Using it, I found that a longer
tip coud be really hepful. For example, 30 or 40 mm instead
of 20mm, because it is used to maintain the handle in position
while turning the handle either when installing it, either
when removing it.
|